See what our Experts say about this CURT Accessories and Parts

• Will Blue Ox TrackPro Shank and Curt Dual Ball Attachment Fit Together?
  Hey Paul, thanks for reaching out! Yes, the Blue Ox TrackPro Weight Distribution Shank # BLU74ER will work with the Curt Dual Ball Attachment # C69NR. Let me know if you have any other questions!
  view full answer...
• Will Curt Dual Ball Mount Fit with Curt Weight Distribution Shank
  Hey Paul, Yes, the Curt Dual Ball Attachment # C69NR and the Curt Weight Distribution Shank # C17122 are compatible with each other. The shank has holes 1-1/4" apart while dual ball attachment has the pins spaced 2-1/2" apart so the pins will skip a hole when you link these together.
  view full answer...
• Is There A Lock For Curt's Rebellion XD Ball Mount Attachments
  Hi Eric, There is a lock set for the Curt Dual Ball Attachment for Weight Distribution Shanks # C69NR with part # C78CR. This would could with two locks, one for the hitch pin (also included) and one for the pins # C56NR included with your mount to prevent anyone from taking off with your equipment. The retention clip for the regular pins can also be purchased with part # CU28FR if you're in a spot where you're adjusting the ball mount a lot and don't have to have keep using the lock.
  view full answer...
• Can The Curt Dual Ball Attachment C69NR Be Used With Gen-Y Torsion Weight Distribution Shank?
  Hello Bob! Yes, the Curt Dual Ball Attachment # C69NR will indeed work with the Gen-Y Torsion Weight Distribution Shanks such as part # 325-GH-1102. The ball attachment is made for standard WD shanks, and the Gen-Y shank uses the same standard width and hole spacing.
  view full answer...
• How to Replace Hitch Balls on the 15K Curt Deep Drop Adjustable 2-Ball Mount
  To replace either of the hitch balls that come with the Curt Deep Drop Adjustable 2-Ball Mount # C49NR you need the Curt Dual Ball Attachment # C69NR. The individual hitch balls aren't replaceable so you have the get the platform piece, but you don't have to replace the entire ball mount. This platform section also comes with the pins to attach it to the shank so you can either have extras or use those as replacements as well.
  view full answer...
• Will Curt Dual Ball Attachment for Weight Distribution Shanks Fit Equal-i-zer Shank
  Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks # C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The # EQ90-02-4500 has 1-1/4" spacing, so every two holes is 2-1/2", meaning this will fit. What are you towing?
  view full answer...
• Will the Curt Dual Ball Attachment for Weight Distribution Shanks Work w/a TorkLift Shank?
  Hey Geoffrey, welcome back! I can confirm that the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks item # C69NR is indeed compatible with the Adjustable Shank for TorkLift SuperHitch Trailer Hitches item # TLM9000. The bolt hole spacing on both parts will line up perfectly for a secure connection along with the pin diameter. Using the Curt Ball Mount item # C69NR with the TorkLift item # TLM9000 will give you the full 15,000 lbs capacity as well. I saw you were looking...
  view full answer...
• Replacement Dual Ball Attachment for Curt Ball Mount
  Hey Ed! If you're referring to the Curt Adjustable 2-Ball Mount # C99NR you were looking at the Curt Dual Ball Attachment # C69NR is the correct replacement. However, you asked about a 20k hitch so it sounds like you may be referring to something else. This dual ball will fit standard weight-distribution shanks with holes spaced 2-1/2" on-center so it can be used with other shanks. The limiting factor would be the capacity of the hitch balls, which is 15k for the 2-5/16" and 10k for the...
  view full answer...

Do you have a question about this Accessories and Part?